Witter Skoda Octavia Estate 4WD/Agrippa February 1999- (SK10)

Tell a friend about this product

Complete the form below to send details of this product, including a link straight to this page.

Your name
Your email
Friend's name
Friend's email
Message	I thought you might be interested in this product on MNC Group.
Submit Code

Witter Skoda Octavia Estate 4WD/Agrippa February 1999- (SK10) Screenshots

No screenshots available

Witter Skoda Octavia Estate 4WD/Agrippa February 1999- (SK10) Review

Witter Lifetime Guarantee


1. Quality Standards
All Witter towbars are designed and manufactured to meet and exceed the requirements of either ISO 3853 or 94/20/EC, as appropriate, and are produced within a quality system conforming to ISO 9001-2000.

2. The Guarantee ? first 6 months from Delivery
During the first 6 months from delivery of your towbar you have certain rights under the Sale and Supply of Goods to Consumers Regulations 2002. These rights will apply if any faults in the materials or workmanship of your towbar mean that during that time your towbar is not of satisfactory quality, or does not conform to specification. In such a case we will repair or replace your towbar or the relevant part free of charge and we will also pay your reasonable postage costs within the UK. If the costs to Witter Towbars of doing so are disproportionately high then we will refund the price of your towbar, or part of the price reflecting the cost to you of the fault.

3. The Guarantee ? after the first 6 months from Delivery
After the first 6 months from delivery, your towbar is covered by this guarantee for the lifetime of the towbar. Subject to the towbar being used and cared for as set out in this guarantee, Witter Towbars will replace or repair free of charge any parts of your towbar which are faulty because of materials or workmanship during the lifetime of your towbar. We will also pay your reasonable postage charges within the UK.

4. Use and Care of Towbar
While Witter Towbars willingly takes responsibility for its materials and workmanship, you could damage your towbar by failing to use or care for your towbar correctly. Therefore your towbar will only be covered by this guarantee if you have used and cared for your towbar correctly. The use and care requirements are set out in the rest of clause 4 below.

4A. Installation
We have supplied installation instructions with your towbar that will suit most vehicles. However, due to the wide range of vehicles available our standard installation instructions may not be suitable for every vehicle. If you are in any doubt about installation of your towbar, please call the Witter technical department for advice before proceeding. The following points must be observed during installation:

a) Your towbar must be installed in accordance with our installation instructions, unless you have been advised otherwise by the Witter technical department. You are responsible for ensuring the installation instructions are suitable for your vehicle.

b) Your towbar must be installed by a competent person.

c) At the time of installation the mounting points and adjacent areas of your vehicle must be free of corrosion or pre-existing damage.

d) Unless stated otherwise in the installation instructions all fasteners are tightened to the following torque settings: M8 - 27Nm, M10 ? 53Nm, M12 ? 95Nm, M14 ? 150Nm, M16 ? 214Nm.

e) Any towball or coupling device fitted to your towbar must have a 'D' and 'S' value either greater than or equal to that of the towbar, or have a part number as specified in the installation instructions.

4B. Paint Finish
The paint finish on your towbar is a water based environmentally friendly corrosion resistant primer. However, it is possible to enhance the performance by applying a topcoat to the towbar prior to installation, especially to visible or exposed surfaces. We recommend that you test any topcoat on a small unexposed area of the towbar before painting the entire towbar.

4C. Maintenance
After 500 miles of towing and thereafter every year you should inspect your towbar and:

a) Re-torque all fixings;

b) Repair any damage to the paint finish; and

c) Replace any damaged components.

4D. Inappropriate Use/Care
The following circumstances are likely to cause harm to your towbar through inappropriate use or care and will mean that your towbar is not covered by this guarantee, unless during the first six months from delivery you can demonstrate that at time of delivery the towbar was flawed through faulty materials or workmanship:

a) If the vehicle on which the towbar is installed is involved in an accident, incident or collision with another vehicle or object, which either directly or indirectly resulted in abnormal loads being applied to the towbar.

b) If the towbar has been damaged, misused or neglected.

c) If any changes, modifications or repairs have been carried out to the towbar or any of its components without the prior written consent of Witter Towbars.

d) If the towbar is transferred to another vehicle.

5. Statutory Rights
This guarantee does not confer any rights other than those expressly set out above and does not cover any claims for consequential loss or damage. This guarantee is offered as an extra benefit and does not affect your statutory rights.

6. Registration
If you register this guarantee with us we will be able to provide you with a better service and easily ascertain that you are entitled to the benefits of this guarantee.

Please register www.witter-towbars.co.uk/lifetimewarranty/registration.aspx.

Note: It is a requirement of the warranty that the towbar fitter or supplier ensures that this warranty information is completed and handed to the vehicle owner, together with any other installation and usage data supplied with the towbar.

Witter Skoda Octavia Estate 4WD/Agrippa February 1999- (SK10) Accessories

Single Electric (Complete kit) A1 ONLY

FREE Towball with every single or double eletrics when ordering a towbar A1 TOWBARS ONLY Prewired for your convenience. Contains - 7pin 'N'Socket. Works road lights on trailer/caravan. Wiring Instructions AUDIO REVERSING WARNING

€26.19 EUR - Our Price: £20.94 (ex vat (20%): £17.45)

Double Electric (Complete kit) A1 ONLY

FREE Towball with every single or double eletrics when ordering a towbar A1 TOWBARS ONLY Prewired for your convenience. Contains - X2 7pin 'N'Socket. Works road lights on trailer/caravan. Wiring Instructions AUDIO REVERSING WARNING

€32.75 EUR - Our Price: £26.18 (ex vat (20%): £21.82)

Witter Z21A ELECTRICAL KIT

Witter Z21A ELECTRICAL KIT High quality pre-boxed electrical kits from Witter Towbar Systems. Wiring Instructions AUDIO REVERSING WARNING

€50.02 EUR - Our Price: £39.99 (ex vat (20%): £33.33)

Witter Z22 ELECTRICAL KIT

Witter Z22 ELECTRICAL KIT High quality pre-boxed electrical kits from Witter Towbar Systems. Wiring Instructions AUDIO REVERSING WARNING

€26.19 EUR - Our Price: £20.94 (ex vat (20%): £17.45)

Witter Z23 ELECTRICAL KIT

Witter Z23 ELECTRICAL KIT High quality pre-boxed electrical kits from Witter Towbar Systems. Wiring Instructions AUDIO REVERSING WARNING

€26.19 EUR - Our Price: £20.94 (ex vat (20%): £17.45)

Witter Double ELECTRICAL KIT

Witter Double ELECTRICAL KIT High quality pre-boxed electrical kits from Witter Towbar Systems. Wiring Instructions AUDIO REVERSING WARNING

€65.52 EUR - Our Price: £52.38 (ex vat (20%): £43.65)

Towball boot in black PVC

Towball boot in black PVC

€6.54 EUR - Our Price: £5.23 (ex vat (20%): £4.36)

Witter Z24 ELECTRICAL KIT

Witter Z24 ELECTRICAL KIT High quality pre-boxed electrical kits from Witter Towbar Systems. Wiring Instructions AUDIO REVERSING WARNING

€45.85 EUR - Our Price: £36.66 (ex vat (20%): £30.55)

Towball 50mm

Towball 50mm (Single). Forged Heavy Duty tow ball for extra long life. Max. load 3500kg. Pre-cast mounting points

€13.10 EUR - Our Price: £10.47 (ex vat (20%): £8.73)

Witter Z72BL Single Sided Step - (open-tread) black paint (left hand)

Z72BL Single Sided Step - (open-tread) black paint (left hand) A range of heavy duty tow steps have been designed for the industrial and fleet user, where regular access into the rear of the vehicle or to load/unload roof storage facilities is required. (Coupling not included).

€65.52 EUR - Our Price: £52.38 (ex vat (20%): £43.65)

Witter Towball 50mm Z11 Heavy Duty

Towball 50mm (Single). E.C. type approved 50mm towball for cars 'S' registered and onwards. (D Value 17KN) This product is not suitable for use with an ALKO coupling and our reference Z13 should be used.

€14.41 EUR - Our Price: £11.52 (ex vat (20%): £9.60)

Witter Z13 ALKO Towball

Witter Z13 ALKO Towball This towball has been specifically designed for use with ALKO stabilisers. It is machined to allow free articulation of the coupling head. This ball should always be used if an ALKO stabiliser coupling is fitted to the trailer.

€39.30 EUR - Our Price: £31.42 (ex vat (20%): £26.18)

Witter ZX15 Pin and Jaw - 1in (1 7/8" Gap)

Witter ZX15 Pin and Jaw - 1in (1 7/8" Gap) Pin and Jaw - 1in (1 7/8" Gap)

€39.30 EUR - Our Price: £31.42 (ex vat (20%): £26.18)

Witter Z82 3.5 tonne Universal Coupling

Z82 Witter 3.5 tonne Universal Coupling This versatile coupling combines an ISO3853 standard 50mm towball with a BSAU24 25mm diameter pin and jaw coupling, allowing the towing vehicle to tow trailers with either a 50mm coupling head or an eye type coupling. 94/20EC Type Approved.

€85.18 EUR - Our Price: £68.10 (ex vat (20%): £56.75)

Witter Z32 Universal Coupling - 3.5 Tonne (2 hole fixing)

Z82 Witter Z32 Universal Coupling - 3.5 Tonne (2 hole fixing) This versatile coupling combines an ISO3853 standard 50mm towball with a BSAU24 25mm diameter pin and jaw coupling, allowing the towing vehicle to tow trailers with either a 50mm coupling head or an eye type coupling.

€104.84 EUR - Our Price: £83.82 (ex vat (20%): £69.85)

Witter Z72AL Single Sided Step - (open-tread) zinc plate (left hand)

Witter Z72AL Single Sided Step - (open-tread) zinc plate (left hand) A range of heavy duty tow steps have been designed for the industrial and fleet user, where regular access into the rear of the vehicle or to load/unload roof storage facilities is required. (Coupling not included).

€52.41 EUR - Our Price: £41.90 (ex vat (20%): £34.92)

Witter Z72AR Single Sided Step - (open-tread) zinc plate (right hand)

Z72AR Single Sided Step - (open-tread) zinc plate (right hand) A range of heavy duty tow steps have been designed for the industrial and fleet user, where regular access into the rear of the vehicle or to load/unload roof storage facilities is required. (Coupling not included).

€52.41 EUR - Our Price: £41.90 (ex vat (20%): £34.92)

Witter Z72BR Single Sided Step - (open-tread) black paint (right hand)

Z72BR Single Sided Step - (open-tread) black paint (right hand)) A range of heavy duty tow steps have been designed for the industrial and fleet user, where regular access into the rear of the vehicle or to load/unload roof storage facilities is required. (Coupling not included).

€65.52 EUR - Our Price: £52.38 (ex vat (20%): £43.65)

Witter Z41C Step/Socket mounting Plate for 2 hole or 4 hole Coupling Mounting

Z41C Step/Socket mounting Plate for 2 hole or 4 hole Coupling Mounting This is a "traditional" step which, over the years, has proved to be very popular with fleet users. Manufactured with a solid chequer-plate top, it can be used with either 2 or 4 hole faceplate towbars.

€91.73 EUR - Our Price: £73.34 (ex vat (20%): £61.12)

Witter Z73A Double Sided Step - (open-tread) zinc plated

Z73A Double Sided Step - (open-tread) zinc plated A range of heavy duty tow steps have been designed for the industrial and fleet user, where regular access into the rear of the vehicle or to load/unload roof storage facilities is required. (Coupling not included).

€78.61 EUR - Our Price: £62.85 (ex vat (20%): £52.38)

Witter Z71B Double Sided Step - (large) Black Paint Finish

Z71B Double Sided Step - (large) Black Paint Finish A range of heavy duty tow steps have been designed for the industrial and fleet user, where regular access into the rear of the vehicle or to load/unload roof storage facilities is required. (Coupling not included).

€157.26 EUR - Our Price: £125.73 (ex vat (20%): £104.78)

Paddy Hopkirk Quickball Towball mounted 1/2 Cycles

Summer Offer SAVE! £10 RRP 49.99 We supply Paddy Hopkirk rear mounted, roof mounted and tow ball mounted cycle carriers.

€52.41 EUR - Our Price: £41.90 (ex vat (20%): £34.92)

Witter Cycle Carrier System for 3/4 Cycles

The New "standard" for towbar mounted cycle carriers, for up to 4 cycles. Longer carrier arms and sleeves to enable up to 3/4 cycles to be carried at the same time, with a longer main column to increase clearance.

€91.73 EUR - Our Price: £73.34 (ex vat (20%): £61.12)

Towbar Bumper protector

Bumper protector plate prevents trailer or caravan coupling damaging the vehicles bumper or bodywork whilst hitching.

€19.65 EUR - Our Price: £15.71 (ex vat (20%): £13.09)

Trailer Light Board

Trailer board to duplicate statutory lighting on the rear of the vehicle when or your rear lights are obscured by a bike rack or trailer. Supplied with attaching straps suitable for mounting on all bike racks & Trailers

€23.58 EUR - Our Price: £18.85 (ex vat (20%): £15.71)

WITTER ZX59 LIGHTING BOARD

Th lighting board has been designed to help the cycle carriers be used safely and legally. It is mandatory to use a suitable lighting board if the number plate or lights are obscured when cycles are fitted.

€62.53 EUR - Our Price: £49.99 (ex vat (20%): £41.66)